@albertoT, who goes, I did everything Steve told me, in the end we have remained in order to send it to him again, look what has happened and forward it.I am going to come out face, because I can't fi…
@albertoT There are no more pins to weld.Only 10. Steve has told me that it seems that he is well soldier.It only occurs to me that when I started to weld I had the tab on ON. I thought the Wixel was …
@albertoT, @enriquec, I upload some photos.I don't know what it is.It was sent to me by Steve Wood all by riding except the BT module.So you should not have crossed cables.The only thing that occurs t…
@jconegar, I don't remember it.If I did it while I have loaded it or is it to be overwhelmed and welded again?Without current I was sure, but I think I was placed
@Jaume has answered the Steve and told me this: Hi Rafael If you have switched off and back on that xDrip Kit and Phone, The Seeing XDRip-Test As Bluetooth Name is usually a sign that connections need…
@albertot from the firmware website I put the ID of my transmitter and I download it.Then I tried to erase the wixel and write it again (I had not tried to delete it), but it continues in them, the te…
@albertoT, and if something wrong I know is hehe.The test is that I do not know where it takes that name, but when looking for it with the BT of the mobile TB that name is seen. He had Bluetooth Wixel…
@enriquec, nothing that is no way, I have already deleted the application a thousand times, I always get it as XDRIP-TEST (if I look from the BT of the TB mobile, it has that name), now I start puttin…
@Enriquec I have updated the wixel and keeps leaving when looking for XDrip-Test.In the end I will have to look at what happened to me. PS: I have read the PDF above and I have found out the fair.I am…
@enriquec in status appeared connected 9 hours ago.Where can I put a false hour? How do I connect to the wixel to see if you are receiving data?The Dexcom receiver is receiving data.And the XDrip has …
@Jaume yes, when I start sensor, it makes me say the time and where I have it.Could it be that when you set it badly, the transmitter ID?Where is the ID that has associated?I don't know, it's that it …
Nothing, after two hours the same results.I don't get the Add Calibration.The device has a fixed blue light and is on.I already did the BT Scan and the Start Sensor.
@jaume @albertot @enriquec If the problem is that I give Star Sensor, at two hours he tells me that I must introduce two red calibrations.But nowhere I have the Add Calibration, I have looked where it…
Another one, I get a pleasant wait, need 2 readings from Transmitter First.But I have no place to add calibration.I have a note 3 with Android Lollipop I have the latest version
Another doubt.I need to have both XDRIP apparatus and the mobile, right?It is that when I play a football I usually leave the dexcom receiver behind the goal, now I should leave both things I suppose
Ah ok, then I about Nightcout, thanks: D And if someone wants to see my values or let him know or something, they are also installed that of XDrip right?
Let's see, some doubts.It turns out that I followed the tutorial and I have installed the application of XDrip and Nigthscout. I am going to try the device and I would like to know if I can have only …
Well, what I see complicated is to change the transmitter batteries, I have seen videos and telita. But come on, in the thread, the Dexcom G4 with the XDrip and you save the receiver seems the best id…
Nightscout and XDRIP [Initiation Guide]
@albertoT, who goes, I did everything Steve told me, in the end we have remained in order to send it to him again, look what has happened and forward it.I am going to come out face, because I can't fi…
Read comment →Nightscout and XDRIP [Initiation Guide]
@albertoT There are no more pins to weld.Only 10. Steve has told me that it seems that he is well soldier.It only occurs to me that when I started to weld I had the tab on ON. I thought the Wixel was …
Read comment →Nightscout and XDRIP [Initiation Guide]
@albertoT, @enriquec, I upload some photos.I don't know what it is.It was sent to me by Steve Wood all by riding except the BT module.So you should not have crossed cables.The only thing that occurs t…
Read comment →Nightscout and XDRIP [Initiation Guide]
@jconegar, I don't remember it.If I did it while I have loaded it or is it to be overwhelmed and welded again?Without current I was sure, but I think I was placed
Read comment →Nightscout and XDRIP [Initiation Guide]
@Jaume has answered the Steve and told me this: Hi Rafael If you have switched off and back on that xDrip Kit and Phone, The Seeing XDRip-Test As Bluetooth Name is usually a sign that connections need…
Read comment →Nightscout and XDRIP [Initiation Guide]
@Jaume, I have tried in a note 3 and a LG G4 and nothing
Read comment →Nightscout and XDRIP [Initiation Guide]
@albertot from the firmware website I put the ID of my transmitter and I download it.Then I tried to erase the wixel and write it again (I had not tried to delete it), but it continues in them, the te…
Read comment →Nightscout and XDRIP [Initiation Guide]
@albertoT, and if something wrong I know is hehe.The test is that I do not know where it takes that name, but when looking for it with the BT of the mobile TB that name is seen. He had Bluetooth Wixel…
Read comment →Nightscout and XDRIP [Initiation Guide]
@enriquec, nothing that is no way, I have already deleted the application a thousand times, I always get it as XDRIP-TEST (if I look from the BT of the TB mobile, it has that name), now I start puttin…
Read comment →Nightscout and XDRIP [Initiation Guide]
@Enriquec I have updated the wixel and keeps leaving when looking for XDrip-Test.In the end I will have to look at what happened to me. PS: I have read the PDF above and I have found out the fair.I am…
Read comment →Nightscout and XDRIP [Initiation Guide]
@enriquec thanks, I have updated the wixel and if I see that I do not look at the PDF that you have passed me that seems complex
Read comment →Nightscout and XDRIP [Initiation Guide]
Mmmm because it puts me xDrip-test that is going to be that @jaume. I will try to update it following some tutorial
Read comment →Nightscout and XDRIP [Initiation Guide]
@enriquec in status appeared connected 9 hours ago.Where can I put a false hour? How do I connect to the wixel to see if you are receiving data?The Dexcom receiver is receiving data.And the XDrip has …
Read comment →Nightscout and XDRIP [Initiation Guide]
@Jaume yes, when I start sensor, it makes me say the time and where I have it.Could it be that when you set it badly, the transmitter ID?Where is the ID that has associated?I don't know, it's that it …
Read comment →Nightscout and XDRIP [Initiation Guide]
Nothing, after two hours the same results.I don't get the Add Calibration.The device has a fixed blue light and is on.I already did the BT Scan and the Start Sensor.
Read comment →Nightscout and XDRIP [Initiation Guide]
With the xDrip+ I get that all the time
Read comment →Nightscout and XDRIP [Initiation Guide]
Add Calibration does not appear to me.I'm going to try that version.I will tell you.Thank you all
Read comment →Nightscout and XDRIP [Initiation Guide]
@jaume @albertot @enriquec If the problem is that I give Star Sensor, at two hours he tells me that I must introduce two red calibrations.But nowhere I have the Add Calibration, I have looked where it…
Read comment →Nightscout and XDRIP [Initiation Guide]
Another one, I get a pleasant wait, need 2 readings from Transmitter First.But I have no place to add calibration.I have a note 3 with Android Lollipop I have the latest version
Read comment →Nightscout and XDRIP [Initiation Guide]
Another doubt.I need to have both XDRIP apparatus and the mobile, right?It is that when I play a football I usually leave the dexcom receiver behind the goal, now I should leave both things I suppose
Read comment →We give 5 Codylife Nature bracelets, on June 30, we already have winners !!!
Jo
Read comment →Nightscout and XDRIP [Initiation Guide]
Ah ok, then I about Nightcout, thanks: D And if someone wants to see my values or let him know or something, they are also installed that of XDrip right?
Read comment →Nightscout and XDRIP [Initiation Guide]
Let's see, some doubts.It turns out that I followed the tutorial and I have installed the application of XDrip and Nigthscout. I am going to try the device and I would like to know if I can have only …
Read comment →Help decide with the monitor
Well, what I see complicated is to change the transmitter batteries, I have seen videos and telita. But come on, in the thread, the Dexcom G4 with the XDrip and you save the receiver seems the best id…
Read comment →