Automatic glucose reading

Hello.
For a few months every time I change the free freestyle sensor, it tells me that automatic readings will be shown every minute.
I have tried it from understanding, and I do not see how to do it, the case is that no data does not happen to me unless I pass my mobile through the sensor.

Can you indicate how to do it, to read my glucose automatically?

P.S.To understand what I tell you, you can see it within the mobile application of "Freestylelibrelink.
A- Go to the 3 stripes up to the left.
B- Help.
C- section that says;Automatic glucose readings.
D- Follow the different screens.

Greetings.

@Jordiv: You have to have Updated LibreLink, version 2.11.2.
In the configuration of your phone, select applications, LibreLink and look at the version you have

What I always do when it doesn't work for me is to uninstall and re -install.

History is lost but it is usually fixed.

ricki21 said:
@jordiv: you have to have updated free, version 2.11.2.
In the configuration of your phone, select applications, LibreLink and look at the version you have

I have this version ,:/:/:/

Active Bluetooth and all permits for LibreLink.In addition to the NFC

jordiv said:

ricki21 said:
@jordiv: you have to have updated freelink, version 2.11.2.
In the configuration of your phone, select applications, LibreLink and look at the version you have

I have this version ,:/:/:/

Does anyone know more ??

Do you have the permission of "nearby devices" and the Bluethooth always activated?

You have to activate the sensor with the phone and, from there, if I have the phone "close" it is updated every minute.Even if you lose the signal for having remote me a lot, you recover it in a couple of minutes to have it next to it.

Only recessing if I am missing a piece of signal on the screen (broken line).For having been far a long time

Good morning, how do you start the new sensor, with the reader or with the mobile?I do start it with the reader does not read me continuous and if I start it with the mobile yes

justallero said:
good morning, how do you start the new sensor, with the reader or with the mobile?If I start it with the reader, it does not read me continuously and if I start it with the mobile yes

Well, the logical thing is to do it backwards.
1- scan with the reader.
2- With the mobile.

grati said:
Do you have the permission of "nearby devices" and the bluethoth always activated?

You have to activate the sensor with the phone and, from there, if I have the phone "close" it is updated every minute.Even if you lose the signal for having remote me a lot, you recover it in a couple of minutes to have it next to it.

Only recessing if I am missing a piece of signal on the screen (broken line).For having been far a long time

Bluetooth is always activated.
"Permission of nearby devices" I don't know what it is.
Where can I activate it?

Do you know if the free link technical support team can solve the problem?

jordiv said:

justallero said:
good morning, how do you start the new sensor, with the reader or with the mobile?If I start it with the reader, it does not read me continuously and if I start it with the mobile yes

Well, the logical thing is to do it backwards.
1- scan with the reader.
2- With the mobile.

If you escape first with the reader, it prevents you from moving continuously reading.I definitely discarded the reader for that reason.

uma said:

jordiv said:

justallero said:
justallero said:
good morning, how do you start the new sensor, with thereader or mobile?If I start it with the reader, it does not read me continuously and if I start it with the mobile yes

Well, the logical thing is to do it backwards.
1- scan with the reader.
2- With the mobile.

If you escape first with the reader, it prevents you from moving continuously reading.I definitely discarded the reader for that reason.

But did they not say that the sensor had to start with the reader, since if not, then did he recognize the sensor ???
Nowhere in this update it is said that we must first scan with the mobile, and then with the reader.I DON'T UNDERSTAND.

Noooo, you start it with what you will read.If you do it with the reader, you can no longer use the mobile.
I don't even have a reader.

The continuous measurement needs the freeLink app and you can only install it on the mobile.That's why you have to start the sensor first with the mobile

ricki21 said:
Continuous measurement needs the free app and this can only be installed on the mobile.That's why you have to first start the sensor with the mobile

Unless you use diabox

ruthbia said:

ricki21 said:
Continuous measurement needs the free app and this can only install it on the mobile.That's why you have to first start the sensor with the mobile

Unless you use Diabox

OSTRASSSSSS.
Well, I use the two, the FreeLink app and the diabox on the mobile.
The Diabox I use it why when I go out sports, I have a headset to listen to the glucose levels that I am taking out, since with the LibreLink I can not see the levels on the route..

I do not use FreeLink continuous because the sensors with the reader active.
Diabox use, and less badly because the sensor that I have now goes 50-60 below and surely spoiled before the 14th, putting it.

Hello.
A few days ago I install the freeLink app with continuous reading meter, and now when it seems to send continuous beeps, and not that they are, to be able to deactivate them.
What warns?
Greetings