Freestyle Freestyle 2 is already here

antonimar said:

ruthbia said:
I do not reinstall diabox, I make Clean data and erase all the data, but before this I make a copy of dataAnd then resto it.
The truth is that with the power that Diabox has, I do not understand why Abbott does not buy the purchase or equal.

Clean Data ???How is it done ??And I understand that you have to copy data?
Thanks

Yes, you copy Clean data and then load them again.It is in User Profile.

Rubioares said:
The only defect I appreciate is that it loses the signal as soon as you separate the sensor's phone.

I do not miss the signal throughout the house and it is a duplex, to see if you have signal problems

ruthbia said:

viking said:
I am perfect, I can already erase the non -original app.The alarms are perfect, the measurements in the minute, I do not see him, for now.My doctor receives everything continuous.It was time.Goodbye app parallel.

And he convinces you that it cannot be calibrate and that of such bad values?
I have the updated Bluetooth -connected app, that is, only NFC and measures just as bad as before.It is still the reader better than the app, at least it is closer to capillary.

It does not give me the bad values, difference with the capillaries of 10-12, the only thing I would like it to have are Diabox's voice notices, that to go by bicycle is very good, but anyway when it came out withDiabox to the street with the bike cut the voice function, I don't know why

Jolín, because I have started trying it yesterday (when I changed the sensor) and I am fatal.I continually give me the "signal loss" message.I have only seen a measurement continues once, and that I keep my mobile very close to me.I don't know if it will be this particular sensor, my mobile or app :(
As for the reliability of the measurements, I am happy, it does not deviate much from the hair measurement.
I think I will call Abbot to take notes and improve these things.

carussa said:
jolín, because I have started trying it yesterday (when I changed the sensor) and I am fatal.I continually give me the "signal loss" message.I have only seen a measurement continues once, and that I keep my mobile very close to me.I don't know if it will be this particular sensor, my mobile or app :(
As for the reliability of the measurements, I am happy, it does not deviate much from the hair measurement.
I think I will call Abbot to take notes and improve these things.

The first two days happened to me and then I barely lose the signal.When escapes occurs again and arrangement!

Well, I'm going to give you another day, to see if you start improving the signal.Thanks @ENSALADA

Well, I almost end with the second sensor with a new application ... and there are days that do not disconnect much and others is hell ... This issue is a little scared, because when losing the connection the alarms do not jump...

I am going to do like other compis of the forum, put a suggestion through the mail to Abbott ... In case it is worth something.
That they have removed the 24h graph and the IRR, I don't like anything ... I was calculating more or less.

In the end the sensor that I told you to disconnect has been fried at all is late.I have put a new one, and for now it sometimes connects well and sometimes it disconnects.I'm going to wait a few days and if I continue like this I will also write some suggestion to Abbott.

After trying luck with two different mobiles ... (which previously worked well with LibreLink) ... I have uninstalled the update and I have returned to 8.4 and for the moment it seems that it is going well ... and I have 24 hours of results...

If you separate loses signal but you bring the mobile closer to the sensor and connect quickly, the Bluetooth is a few meters at 10-15 meters loses the signal

rogerix said:
If you separate loses signal but bring the mobile closer to the sensor and connect again quickly, the bluetooth is a few meters at 10-15 meters loses the signal

That is fine for those who move away ... but in the cases that having it in hand it is disconnected .... the explanation must be another ..

I don't know if it happens to any.I have the free2 without bluetooth so that the diabox works but when it connects the Bluetooth headphones there, the lios is coming and I disconnect Diabox or I cannot connect the headphones.

@Javierlaladez will be your Bluetooth thing to me does not happen to me

rogerix said:
@Javierlaladez will be your bluetooth's thing it does not happen to me

I am not a computer specialist ... but Bluetooth has worked perfectly until this update ... I think that is not the solution either.

Good morning, I expose my experience, I have three sensors put, the first apparentIt is disconnected, in my house that it is a duplex, it gives for the whole house, that if you test, if you go to the other tip of the house and lock yourself in a room, there if it is usually disconnected, another way that is alsoIt usually disconnects is doing sport by bicycle through the mountain but the alone is recovered, this happened with Diabox but this did not recover I had to read the sensor again.
The ideal would be that Freestyle Free 2 had continuous voice warnings like Diabox, but this does not have it, I say it for those who make a bicycle, the voice warnings are doing very well

It is disconnected if, but you bring it closer to the sensor again and scan and recover the connection, another thing is that it is disconnected being close to the mobile

Greetings, I have been reading your experiences with the update and I want to leave mine, I have been with the second sensor started after the update, with the first everything great until the alarms worked for me both in Diabox and with Abbott, now with the second nothingAt nothing, the continuous measurement has been lost in both, I have tried to disconnect/connect the bluetooth, restart the mobile and I do not get anything very curious is that I have disappeared the option in diabox settings of 1/5 minutes of 1/5 minutesTime between measurements, in short that if I want to know how I have to scan the sensor with any of the 2, summarizing a giant PM the update, I will call Abbott to see what they tell me because I do not like anything to be without alarms, with the 2He continuously posted, in short I do not control the world of app or mobiles so but it is not a matter of putting so many obstacles so that the app works properly, it is necessary to say that in Abbott they will tell me that the fault is not them, well it is wellMy opinion on the topic of the update, thank you.

ottawa said:
greetings, I have been reading your experiences with the update and I want to leave mine, I have been with the second sensor started after the update, with the first everything all great until the alarms meThey worked both in Diabox and Abbott, now with the second nothing at all, the continuous measurement has been lost in both, I have tried to disconnect/connect the bluetooth, restart the mobile and I do not get anything and something very curious is that it hasThe option in 1/5 minutes of time diaboxThey have nothing like to be without alarms, with the 2 continuously hung, in short I do not control the world of app or mobile but it is not a matter of putting so many obstacles so that the app works correctly, there is plenty of saying that inAbbott will tell me that the fault is not them, well it is my opinion on the subject of update, thanks.

I already imagine that they will not give you any solution (if it were not hesitation to share it) ... the safest thing they tell you that your mobile is not compatible ....

@Ottawa: Diabox's Bluetooth and LibreLink's interference are interference.I solve it by removing the permission of "nearby devices" to LibreLink once I have started the sensor with this app and I have Diabox that works for me.
FreeLink's screen asks you for permits (attached photo) but I don't give them and scan the sensor directly as it did before having the update.
When I make the sensor change, Diabox has made strange things for me for a couple of months.What I do is re -install the February 16 version of Telegram regardless of my previous data (Blackup).
I hope that solutions you have

I finish talking to Abbott and they replace the sensor, they have asked me about the version of the app, the SO and the mobile model plus the error message that appears in the "Event Registry" 335 I came out that I would say it is not sorelevant because it seems to me is when it does not read something that happens very often and you have to retire the NFC with the sensor until you hear that reading has gone well, because that has not put any paste but I am trembling because I have the one I have inreserve is the same manufacturing lot, in short I hope to be lucky with which I am going to put on, thanks