ruthbia said: ruthbia said: @noahasadream if you don't connect the diabox, click onNFC scan and pass the mobile on the sensor to reconnect it.It usually works at first.If not, reinstall the APK again, without erasing what you have.
In the last updates measures every 5 min but you can change it to 1 min.The alarms sound quite high, to lower them, you have to force Piten (for example, changing the serial sound) and at that time lower the volume with the mobile buttons.I have them at least and they let me sleep.
You can calibrate it with the capillaries and change the approach algorithm.I use the Savizky-Golay and I approach the medions quite a lot or simply remove the noise, which is basically clean the curve and leave a behavior tendec.
Hello What is Savizky-Golay and noise reduction?I have never activated those opinions Thanks
@pimbri is statistical.They are complex algorithms to predict the real value of blood glucose based on the last 3 capillary values that you have previously introduced into Diabox using the GoodMode mode. Savizky-Golay was a mathematician who made his own algorithm and the noise reduction is simplySometimes it happens that between half it measures in 1 min 145mg/dl for a failure (sensor pressed in bed, temperature, etc.) and the next minute returns to 105mg/dl, as removing the noise means eliminating the data of 145mg/dl becauseIt is not really the value you had.
I didn't have it.Of Sabizky GOLY activated.If active, then, take away my noises that you explain and is more accurate? Nor did I know about the alarms, I usually activate those of the Free and annulment those of Diabox.
ruthbia said: @noahasadream if you don't connect the diabox, click on NFC scan and pass the mobile phone on the sensor forThat reconnects it.It usually works at first.If not, reinstall the APK again, without erasing what you have.
In the last updates measures every 5 min but you can change it to 1 min.The alarms sound quite high, to lower them, you have to force Piten (for example, changing the serial sound) and at that time lower the volume with the mobile buttons.I have them at least and they let me sleep.
You can calibrate it with the capillaries and change the approach algorithm.I use the Savizky-Golay and I approach the medions quite a lot or simply remove the noise, which is basically clean the curve and leave a behavior tendec.
Hello What is Savizky-Golay and noise reduction?I have never activated those opinions Thanks
@pimbri is statistical.They are complex algorithms to predict the real value of blood glucose based on the last 3 capillary values that you have previously introduced into Diabox using the GoodMode mode. Savizky-Golay was a mathematician who made his own algorithm and the noise reduction is simplySometimes it happens that between half it measures in 1 min 145mg/dl for a failure (sensor pressed in bed, temperature, etc.) and the next minute returns to 105mg/dl, as removing the noise means eliminating the data of 145mg/dl becauseIt is not really the value you had.
I didn't have it.Of Sabizky GOLY activated.If active, then, take away my noises that you explain and is more accurate? Nor did I know about the alarms, I usually activate those of the free and annul
From what I see or choose Savitzky, or remove the noise.The two do not let them mark them
DM 2 con páncreas agotado desde diciembre 2020. 51 años entonces. HG diciembre 2020: 15.9. Última HG: julio 2024 5.8 Abasaglar 9 unidades. Metformina, 1000/0/1000. Humalog junior: 2 unid en desayuno y luego en función de lo que coma.
A question, in diabox, adjustments, algorithm, calibration.If you give it calibration, you get the graph of one day with a slope and values, does anyone know what it means or how is it interpreted? And below puts reset caliibration.What is it for? Can you calibrate from there again?I have not done it in case, I do it from the sensor's drawing as always but it has caught my attention because I had never seen that.Screen.
No signature configured, update it from user's profile.
Exact.There you see all the measures that you have put and always use the last 3 for predictions. If you delete calibrations, start calculating again as soon as you put 3 measures.
What you see is a line of the calculation algorithm and the cloud of points. I deleted Cuabdo a lot of prediction because the sensor fails again
ruthbia said: exact.There you see all the measures that you have put and always use the last 3 for predictions. If you delete calibrations, start calculating again as soon as you put 3 measures.
What you see is a line of the calculation algorithm and the cloud of points. I deleted Cuabdo a lot of prediction because the sensor fails again
No signature configured, update it from user's profile.
Hello!! I have been using Diabox for a week and the truth is that I am delighted, simpler than XDrip, I started using it when I had already started the sensor with patching free, I have the doubt that no matter how much I have read I have not known how to solve, can I start the next sensorWith official LibreLink and remove the patch, or do I have to continue starting the sensor with the patch?
And now I tell you something that has been curious and I don't know if it will have happened to someone, yesterday I scanned me and I gave me the sensor and told me that it will change in the official app but I have been working with Diabox withoutNo problem and with data nailed to glycemia.
No signature configured, update it from user's profile.
@franjgr if whatever you say.ABBott's app or glucometer they say exhausted sensor and diabos continues to register.It has happened to me between the app and the glucometer and between app, glycometer and diabox.
The good thing about Diabox is calibration and lasting 14.5 days.In addition, the measures are closer to blood reality, at least it happens to me.
Has anyone tried if you can use Miband 6?I found an English link that was already available in XDRIP for Miband 6, but as I always find a mess.I do not know whether to continue with the miband 4 that I have now that it works: D but I also have the 6 that I bought last year and I am sad not to take advantage of it ... but of course without the measure of the sugar on the clock I do not want it, thatOne is easy to improve;)
Hi, I wanted to make a diabox consultation.My son carries the freestyle 2 with XDRIP patching, for now everything works without problem.The issue is that tomorrow goes from camping and returns on Friday.I always put the new sensor on Thursdays, one day before the other is over, and in this way it is working very well.Being outside I will not be able to put it on Thursday and I have thought about putting the new on Friday afternoon and using Diabox to be able to extend the readings a bit, and thus be able to activate the sensor the next day with a few hours already inserted.It seems good idea?Can I link the diabox sensor at any time?In this case almost at the end of the useful life of the sensor.
No signature configured, update it from user's profile.
The sensor has 14.5 days if you use Diabox, I would not connect it just the last day, I would try to put it a little earlier.Today for example. Diabox measures you what the sensor has accumulated in the last 8 hours, it doesn't matter as it is already started.From that moment on, the information to the mobile is moved every 5min by default and you can configure it for 1 min (I do not like frequency personally, the mobile battery is quickly exhausted)
The truth is that it is a good idea to activate Diabox, I had not raised it because Xdrip works perfectly to us and I am afraid to make it just for the days of camping.
No signature configured, update it from user's profile.
ruthbia said: The sensor has 14.5 days if you use Diabox, I would not connect it just the last day, I would try to put it a little earlier.Today for example. Diabox measures you what the sensor has accumulated in the last 8 hours, it doesn't matter as it is already started.From that moment on, the information to the mobile every 5min by default and you can configure it for 1 min (I do not like frequency personally, the mobile battery is rapidly exhausted)
How do you set it for every 5 minutes?, I have each min by default
ruthbia said: The sensor has 14.5 days if you use Diabox, I would not connect it just the last day, I would try to put it a littlebefore.Today for example. Diabox measures you what the sensor has accumulated in the last 8 hours, it doesn't matter as it is already started.From that moment on, the information to the mobile every 5min by default and you can configure it for 1 min (I do not like frequency personally, the mobile battery is rapidly exhausted)
How configures it for every 5 minutes?, I have each min by default
ruthbia said: The sensor has 14.5 days if you use Diabox, I would not connect it just the last day, I would try to put it a littlebefore.Today for example. Diabox measures you what the sensor has accumulated in the last 8 hours, it doesn't matter as it is already started.From that moment on, the information to the mobile every 5min by default and you can configure it for 1 min (I do not like frequency personally, the mobile battery is rapidly exhausted)
How configures it for every 5 minutes?, I have each min by default
By default it is every 5min, in configuration, it gives you the option to mark with a "V" if you want it to arrive every minute, if you do not mark it, you reach you every 5 min, in the consumption of the mobile battery it shows.
