Diabox failures

Good morning.It is failing me a lot lately Diabox, does not make the countdown, is caught ... even with the sensor already in more than 7 days.I have the Nov 2023 version, I see that there is one of 2024, better to change that?

meginer said:
@meginer said:

Good morning.It is failing me a lot lately Diabox, does not make the countdown, is caught ... even with the sensor already in more than 7 days.I have the Nov 2023 version, I see that there is one of 2024, better to change that?

cgs said:
@CGS said:

meginer said:
Meginersaid:
@meginer said:

Good morning.It is failing me a lot lately Diabox, does not make the countdown, is caught ... even with the sensor already in more than 7 days.I have the Nov 2023 version, I see that there is one of 2024, better to change that?

What sensor do you have, the 2 to dry or the 2+?Because that happens to me with the 2+ and the version of 23

I am doing well.It doesn't give me problems.

Try to restart the app from applications.

@Ruthbia said:

I am doing well.It doesn't give me problems.

Try to restart the app from applications.

It goes for streaks ... Now it seems that it is more or less good.

I think they are lots because there is some that fabric between disconnections or sensor failures ... while others do not give war in 15 days.

My trick: (I think I have read it for the forum)

Force detection

Remove Bluetooth

Draw Diabox and when you give you notice that you have the Bluetooth deactivated activate it.

Thus hooks sometimes even without scanning.

@meginer Yes of 2023,

Now I finish a normal free and I will have to try the plus ... I'll see how such

Ruthbia said:
@Ruthbia said:

@meginer Yes of 2023,

Now I finish a normal free and I will have to try the plus ... I'll see how normal

@meginer then tell you:

Yesterday I started the Plus sensor with the reader, as always, I thought I could not since my reader is for free 1 and I had to update with software when they marketed free 2.

So far well.

But I did not linked with Diabox (June 2023), so I got the new version that is another different name Diaboxkotlin and nothing, there was no shape.

In the end suddenly, Diabox without doing nothing linked and goes as always.They linked both but the Diaboxkotlin did not just go well and I have uninstalled it.

They say, they say ... that the plus is more precise and lasts 15 days, no 14. I can't tell you at the moment, I don't have any capillary, I wait for the second day to stabilize.

Ruthbia said:
@Ruthbia said:

@meginer then tell you:

Yesterday I started the Plus sensor with the reader, as always, I thought I could not since my reader is for free 1 and I had to update with software when they marketed free 2.

So far well.

But I did not linked with Diabox (June 2023), so I got the new version that is another different name Diaboxkotlin and nothing, there was no shape.

In the end suddenly, Diabox without doing nothing linked and goes as always.They linked both but the Diaboxkotlin did not just go well and I have uninstalled it.

They say, they say ... that the plus is more precise and lasts 15 days, no 14. I can't tell you at the moment, I don't have any capillary, I wait for the second day to stabilize.

Yes, there is no free 2 first version, they are all plus.My nurse told me that I was seeing the free 3 so small that it disliked that they will not yet be financed by the SS.

I have already calibrated and gives me the same fault ranges as free 2 version 1. I don't see improvement in this aspect, so I stay with which it lasts 24 hours more than the previous one.

@Ruthbia, with the plus, this last time, in Diabox I had to wait 60 minutes, he made the countdown, has it happened to you?.

Ruthbia said:
@Ruthbia said:

Yes, there is no free 2 first version, they are all plus.My nurse told me that I was seeing the free 3 so small that it disliked that they will not yet be financed by the SS.

I have already calibrated and gives me the same fault ranges as free 2 version 1. I don't see improvement in this aspect, so I stay with which it lasts 24 hours more than the previous one.

I do not know if the plus you say, it is necessary to update it and download the app to be continuous.But I already tell you that I still have the normal one and they have not told us anything about the plus ... to see the next roughness.

I continue with free 2 in the Community of Madrid.I still have 4 sensors.We will have to wait for the next collection.Regarding Diaboxkotlin, it is absolutely unstable with respect to the Bluethouse connection, reset, scanning, signal losses .... come on that I have uninstalled it because this latest beta version of November 24 is not stable, yet to know that I will not be able to calibrate.But since, always, to my freeLink it is measured from 10 to 20 units of less .... I calibrate directly in my head

Arse said:
@

I continue with free 2 in the Community of Madrid.I still have 4 sensors.We will have to wait for the next collection.Regarding Diaboxkotlin, it is absolutely unstable with respect to the Bluethouse connection, reset, scanning, signal losses .... come on that I have uninstalled it because this latest beta version of November 24 is not stable, yet to know that I will not be able to calibrate.But since, always, to my freeLink it is measured from 10 to 20 units of less .... I calibrate directly in my head

@Anaisabel did not restart me, wait a few minutes and reached alone.Of course with June 2023.

Diaboxkotlin is apparently the same as Diabox but it didn't work for me.If it allows to calibrate but fails.

@Meginer measures me continuously with the plus, I have no problems, but I do not use LibreLink and I have no interference.For me that they have only extended 24h the duration, the rest is all the same.

@Set in Madrid gave me the first 6 plus in January, I had 4 normal and that's why I released it in March.They come from the FJD.

@Ruthbia said:

@Anaisabel did not restart me, wait a few minutes and reached alone.Of course with June 2023.

Diaboxkotlin is apparently the same as Diabox but it didn't work for me.If it allows to calibrate but fails.

@Meginer measures me continuously with the plus, I have no problems, but I do not use LibreLink and I have no interference.For me that they have only extended 24h the duration, the rest is all the same.

@Set in Madrid gave me the first 6 plus in January, I had 4 normal and that's why I released it in March.They come from the FJD.

Hello, I go the FreePlus and Diabox.The free plus (the app) is continuous if the sensor does not start with the small Free meter.I normally, as I have Diabox and Smartwatch, I am not interested in the continuous measurement of the free, so I start a sensor nut with meter (not with app) and then with app free.

In this way I have 3 possible measurements at the same time.It has always done well like this: Diabox for the clock;The meter, by the time the Free apps gives error or I forget the mobile and mobile with the app free, to register everything and that it comes to him.

Peeeeero, a few days ago Diabox hangs me, it does not let me calibrate and send erronese readings to the clock, so that I spend the night in candle stopping the false alarm of the clock.

I don't know if it has to do with the free plus.

Amga said:
@Amga said:

[[ERROR-TRANS]]Hola, yo te go el FreePlus y Diabox. El Free plus (la App)es continuo si no se inicia el sensor primero con el pequeño medidor de Free. Yo normalmente, como tengo Diabox y Smartwatch, no me interesa la medición continua del Free, por lo cual inicio nuejo sensor primero con medidor( no con App) y despues con App Free.

In this way I have 3 possible measurements at the same time.It has always done well like this: Diabox for the clock;The meter, by the time the Free apps gives error or I forget the mobile and mobile with the app free, to register everything and that it comes to him.

Peeeeero, a few days ago Diabox hangs me, it does not let me calibrate and send erronese readings to the clock, so that I spend the night in candle stopping the false alarm of the clock.

I don't know if it has to do with the free plus.

If no.UUSO DIABOX, and only use the Free 2 Plus continuous, there is some way of being able to use the clock? I currently have Diabox, XDrip and Nightscout and with Watchdrip arrive the data to my Amazfit GTS mini clock, a pull, I know, but the only way I have seen to do it.

It is also happening to me lately that I am hung a lot of diabox and what you say, it does not let me calibrate, because there is a lot of difference between the channel and the measurement when I see that no. It is true, it should not be the plus PQ has happened to me with the normal. 2.

A time ago the sensors have arrived and they are indeed plus.I still have one of the old ones.

What do you recommend then, to start with the reader to continue with Diabox and the PQ watch if not, I will see the measurements in the clock or Quito Diabox and I keep the continuous measurement of the free and try to have measurement in a clock in another way if there is?

[[ERROR-TRANS]]Lo digo pq últimamente no puedo calibrar y el tener diabox es por eso, si no voy a poder hacerlo...

Thank you and forgive the .toccho.

meginer said:
@meginer said:

Ruthbia said:
@Ruthbia said:

@Anaisabel did not restart me, wait a few minutes and reached alone.Of course with June 2023.

Diaboxkotlin is apparently the same as Diabox but it didn't work for me.If it allows to calibrate but fails.

@Meginer measures me continuously with the plus, I have no problems, but I do not use LibreLink and I have no interference.For me that they have only extended 24h the duration, the rest is all the same.

@Set in Madrid gave me the first 6 plus in January, I had 4 normal and that's why I released it in March.They come from the FJD.

But you have the free 2 continuous? I mean that if you downloaded the version of the Free continuous.I have the old one, scan with my mobile and I have diabox for everything else, I have the permits removed to the free.But my question is that with the plus you can continue like this or you have to have the continuous version of the free and if it does not.Pq if you are going to give problems, Quito Diabox ta Q The interesting thing is that it can calibrate, and if you can't, it is not worth it.

The same as with free 2 when I was not plus.In a clock with G-Watch and without problems taking Diabox data.

I have this version of LibreLink