Diabox for clumsy

Well yesterday he told me some log out but I did not make a case and I still work ...

I am all good, but I read something on Telegram that the server had fallen

ruthbia said:
I all well, but I read something on Telegram that had fallen the server

Yes, I just logged into Diabox again.
Apparently it was a issue of maintenance of the servers.

Hello
When do you start sensor with LibreLKNK, do you wait 60 minutes and then start with Diabox ??
Or do you start both at the same time?

anaisabel said:
hello
When do you start sensor with LibreLKNK, do you wait 60 minutes and then start with Diabox ??
Or do you start both at the same time?

I start with Diabox when LibreLink is already working well (always after 60 minutes of waiting, of course)

Yes, I do so too, but yesterday when I put on the new sensor I asked that question.As in LibreLink I have neither alarms nor continuous measurement if nothing would happen to start both at the same time without waiting for 60 minutes.
Thanks @isabelbota

anaisabel said:
yes, I do so too, but yesterday when I put the new sensor I asked that question.As in LibreLink I have neither alarms nor continuous measurement if nothing would happen to start both at the same time without waiting for 60 minutes.
Thank you @isabelbota

I start at the same time.I used to take advantage of the extra that I had with Diabox, but now when it is exhausted in free, it is exhausted in Diabox ... so start first with free and then with Diabox.Without problems, beyond the disconnections (which I don't have to have only free than both, it is disconnected the same)

Well, I can't get Diabox to measure, it only works if you scan by NFC.And I can't calibrate it either :(

carussa said:
Well I can't get Diabox to measure, it only works if you scan by NFC.And I can't calibrate it either: (

Have you looked that you have granted all the permits that app needs such as those of remaining open in the background, ignoring battery consumption, etc ...?

The two at the same time, what happens is that when the start period passes, Diabox asks me to connect again.But ready, don't disconnect anymore.

@Carussa The transmission is for Bluetooth, check this connection

Next time, I will try both at the same time.
Thank you.

@Ruthbia you are right, you must fail for the Bluetooth connection.But when I try to link both devices (mobile and sensor), it gives me an error during the link.I don't know what can happen :(

If you have active free, it seems that sometimes it prevents connection.Remove all permissions to LibreLink.
I have it annulled, I pass the mobile on the sensor so that my doctor see data, but it has no connection activates.

In Diabox the Bluetooth icon illuminates in blue when connected, knows SFC scan.

@Ruthbia in Diabox on Bluetooth icon does appear illuminated in blue, but only receives sensor data if you scan it.
And how do you take away all the permits to LibreLink?

@Ruthbia does not let me calibrate either.When I try (I have already put the GoodMode), this message appears to me: "Cannot Calibrate for Free2 Disconnected with Diabox More than 5 MINTS"

If you do not measure you continuously you will not be able to calibrate.When you calibrate, more than 5 minutes have to pass since the last measurement.

@Anaisabel yes, it must be that.The key is that the measurement continues does not work in Diabox, but I have never been able to with the last update with LibreLink.I imagine that it will be my mobile problem.
Thanks @anaisabel and @ruthbia

Try to cancel FreeLink and Diabox change in Bluetooth connectivity, in other configurations.
Thus it does not interfere with each other and connect better.

Hello, Diabox was not going well, I have uninstalled it and install again, I have the version 2023.06.15-147 beta now goes well, but it measures every minute, how can I change the measurement time
Thank you

I have that version installed but when I open it immediately, it has happened to someone?