Diabox for clumsy

meginer said:

valky said:

meginer said:
meginer said:

Thank you @meginer
So if I put "Nightscout follower" in XDrip data source, I will have to put the URL that I believed in Heroku.Like there comes the problem, I don't know if I did it well from the beginning ... I will have to review the first steps and manuals: P because I still don't understand how Nightscout data takes.: S

The Nightscout data takes them from the continuous meter that you have, either the patch or diabox.In my case, I have Diabox that takes the data of Free 2 and makes them continuous without having to scan, then send them to Nightcout and XDRIP take them to send them to the bracelet.

Ahh, great, much clearer, now I just need to find out how to tell Nightscout to take Diabox data.
Thanks !!!!

You have to put the URL address and that's it, your apisecret and all that

Millions of thanks @meginer yesterday at 23.55 I managed to make everything work!But with the bad luck that today I had to change the sensor, so I have been part of the morning with cuts, waiting to see if I returned only fear of touching more hehe.But everything already works.
By the way, you said that conflict with alarms is created and that you have to remove some (the truth is that they are a pain at night, because until you go up from the downturn they are whistling and vibrating all).Which one do you advise me to leave?Diabox or XDrip?(The LibreLink was giving me a failure from the first day I put the free2 sensors, so now I still trust, I prefer to try some of the other two).

valky said:

meginer said:

valky said:
valky said:

meginer said:
meginer said:
meginer said:
meginer said:

valky said:
valky said:
valky said:
valky said:
valky said:
valky said:
valky said:
valky said:
thanks @meginer
So if I put "Nightscout follower" in XDrip data source, I will have to put the URL that I believed in Heroku.Like there comes the problem, I don't know if I did it well from the beginning ... I will have to review the first steps and manuals: P because I still don't understand how Nightscout data takes.: S

The Nightscout data takes them from the continuous meter that you have, either the patch or diabox.In my case, I have Diabox that takes the data of Free 2 and makes them continuous without having to scan, then send them to Nightcout and XDRIP take them to send them to the bracelet.

Ahh, great, much clearer, now I just need to find out how to tell Nightscout to take Diabox data.
Thanks !!!!

You have to put the URL address and that's it, your apisecret and all that

Millions of thanks @meginer yesterday at 23.55 I managed to make everything work!But with the bad luck that today I had to change the sensor, so I have been part of the morning with cuts, waiting to see if I returned only fear of touching more hehe.But everything already works.
By the way, you said that conflict with alarms is created and that you have to remove some (the truth is that they are a pain at night, because until you go up from the downturn they are whistling and vibrating all).Which one do you advise me to leave?Diabox or XDrip?(The LibreLink was giving me a failure from the first day I put the free2 sensors, so now I still trust, I prefer to try some of the other two).

I usually leave the free of the free, it is the one that interests me at night sleeping, a long time ago, before the sensors, I had many inadvertent night fat drops and more than once I was afraid.Those of Diabox Pegam a scare that you do not see, if you prefer Diabox there is an option when putting the alarms that it is to give the place I think and several sounds come out, the one I usually put is door Bell q is the only "acceptable", it is soundQ comes by default is a horror and sticks scares that you don't see.I have not had alarms in XDrip, I have never put them so that I cannot tell you but for other people, I know they work quite well.
To me the Free have never failed me, yes, when I active a new sensor, it is what I have already told you, that in theory, there is a null blast alarms of the free and take away beautiful Bluetooth from the free and when the time passes the timeHeating, active first free and.Then Diabox and Cdo Diabox only starts to send data, and it has been doing it for a while, it is Cdo if you want, you can activate the free alarms.I tell you in theory, because I usually go even even having the two active, (Free and Diabox?, I do not usually disconnect, but apparently many mobiles if they do, I have an xiaomi and I do very well, fearI have cdo to change mobile, hehe.

Hello, does anyone know how to install diabox in iOS?It is no longer available.

Thank you.

Hello.It is the first time I write in the forum, although I have been reading you for some time.But today I have encouraged myself to ask you a question.A few months ago I bought a mini bubble that I am using with Diabox and an iPhone phone.So far I have worked more or less well, but yesterday I got a message that says that Diabox Beta has expired and stopped working.Has this happened to any?What can I do to work again?I would very much appreciate your help.

Several sensors have worked well.

But he who has my son now puts values ​​of sixty -something, when he has ninety -peak according to capillary.

I have calibrated several times and erased calibrations and there is no way to refine it.

I do not know if it has happened to you and has a solution, or it is time to change until changing a sensor.

@Mcnulty does not change sensor, it returns to the traditional method of crushing your fingers.
The one I have now is a guyvive, but I never change them, I leave them on and make my hair.More or less I know how I go, I don't need to capillary for food, only if the figure does not fit me much.
Yesterday I went out and I was going to put insulin because I put 194 and climbing, the capillary gave me 150, thankfully I didn't put anything on, what a hypo I would have given me!

mcnulty said:
several sensors have worked well.

But he who has my son now puts values ​​of sixty -something, when he has ninety -peak according to capillary.

I have calibrated several times and erased calibrations and there is no way to refine it.

I don't know if it happened to you and has a solution, or it is time to change the sensor.

Well, I, like Ruthbia, have stayed and effectively touch more capillaries.But there are people who call and get them to change.Already what you see.

Normally, with calibrations, acceptable results are usually achieved.In the latter I have erased several and flight to do them, waiting for something more to the capillary values.

But it is true that it normally manages to refine.

Lately, I get this in Diabox, can someone tell me what is it?

anaisabel said:
lately, I get this in Diabox, can anyone tell me what is it?

What does it mean?And why I get like this.It happens to me when you scan.

I don't know if what do you mean, it's yours, right?

AVG is average, average in English.
I see that screen when I look for a last day.It gives you the line (I have marked the "line" square) and the average.
But when I scan I get the value of the moment, not the average.

Ahhhh, now I understand.
I didn't even know what the calendar could be looked at.
How clumsy I am !!!!I once opened my calendar and I have always asked where I went out and now I have touched and voila
Thanks @isabelbota

anaisabel said:
ahhhh, now I understand.
I didn't even know what the calendar could be looked at.
How clumsy I am !!!!I once opened my calendar and I have always asked where I went out and now I have touched and voila
Thank you @isabelbota

I also discovered it by chance.This is rehearsal-error ...
You're welcome, that's what we are.

anaisabel said:
ahhhh, now I understand.
I didn't even know what the calendar could be looked at.
How clumsy I am !!!!I once opened my calendar and I have always asked where I went out and now I have touched and voila
Thank you @isabelbota

What version do you have?I don't get the Avg."Max-Width: 300px; Height: Auto;"/>

@meginer ssle avg average of the day, if you click on the date and choose a last day that is not EM that is ongoing.

ruthbia said:
@meginer ssle avg average of the day, if you click on the date and choose a last day that is not em that is ongoing.

Go !!, Well, I just found out, hehehe.Thank you.

Hello
I have always activated first with Free Glucometer, then with LibreLink and finally with Diabox.In doing so, the alarms worked in Diabox.
Today I was wrong and I first activated with LibreLink and the alarms have been activated.Now they will not sound to me in Diabox ??Or if you deactivated the problem will be solved.

I active first with LibreLink and then Diabox.LibreLink tells me that they will not sound but both sound to me: free and diabox.Without deactivating anything.