Diabox failures

@Ruthbia said:

Yes, the new ones measure 30 or more below.The others above.

Well, I don't know@meginerMaybe the next one you activate with Diabox.

Everyone starts for 301, and it gives me that they will continue so they will send the new ones, all are after the launch of the latest version of 2023. So as Diabox does not try to fix it ... if at least Diaboxkotlin will work for me ...

So I don't want to risk, maybe better keep the free continuous and at least I have alarms.I have no app.

I tried to use Diaboxkotlin with the free 2 plus and what happened to you so I decided to take it out and put one of the old ones and they do well with the Kotlin and I have Android 14 and to wait for the Diabox to improve the last version because with the plus it does not go.

alber1 said:
@Alber1 said:

I tried to use Diaboxkotlin with the free 2 plus and what happened to you so I decided to take it out and put one of the old ones and they do well with the Kotlin and I have Android 14 and to wait for the Diabox to improve the last version because with the plus it does not go.

I have Asisa for MuFace and for now they give me the free 2, it is Abbot that in a replacement I send me the 2 plus so I still use the old ones

meginer said:
@meginer said:

alber1 said:
Alber1said:
@Alber1said:

I tried to use Diaboxkotlin with the free 2 plus and what happened to you so I decided to take it out and put one of the old ones and they do well with the Kotlin and I have Android 14 and to wait for the Diabox to improve the last version because with the plus it does not go.

But they finance them and send me 8 for 4 months, they just send them to me, and I cannot know or control which ones to send, I intuit that of the new ones ...

@Ruthbia said:

Meginersaid:
@meginersaid:

Alber1said:
Alber1said:
@Alber1said:

I tried to use Diaboxkotlin with the free 2 plus and what happened to you so I decided to take it out and put one of the old ones and they do well with the Kotlin and I have Android 14 and to wait for the Diabox to improve the last version because with the plus it does not go.

But they finance them and send me 8 for 4 months, they just send them to me, and I cannot know or control which ones to send, I intuit that of the new ones ...

Yes, I have all new for 2 months.Of course, none has reached me 15 days, ask for replacement to day 10 or 12. Low begin to measure, Low until the message of re -levating sensor comes out.

If that is an acceptable difference ...

I am about to call them, to see what they tell me, because it is even dangerous, if I trust 52 and I take glucose and then it gives me a good climb ..., they will give them the same, I need to be in a range of 70 to 140.

@Ruthbia said:

Meginersaid:
@meginersaid:

Alber1said:
Alber1said:
@Alber1said:

I tried to use Diaboxkotlin with the free 2 plus and what happened to you so I decided to take it out and put one of the old ones and they do well with the Kotlin and I have Android 14 and to wait for the Diabox to improve the last version because with the plus it does not go.

But they finance them and send me 8 for 4 months, they just send them to me, and I cannot know or control which ones to send, I intuit that of the new ones ...

Yes, I have all new for 2 months.Of course, none has reached me 15 days, ask for replacement to day 10 or 12. Low begin to measure, Low until the message of re -levating sensor comes out.

In the group they say that they are working on it and they hope to get a version so that this is solved,

I just activated but, like all the "new ones" to the 12th that I end, that as is continuously calibration, nothing that for security is deactivated and that another restarts.

Yesterday at 5pm the sensor made 14 days and has given me 11h more and then continues to measure sinn graph or trend.This afternoon there is 15dias and put another one, I cross lis fingers to see what happens, better to see if nothing happens.

@Ruthbia You will not know what I can do so that I let me accept or save the adjustments that I want to make in Diabox?

[[ERROR-TRANS]]Desde q se actualuzo a android 15 no puedo modificar nada, ya q la pantalka de acrptar se que muy baja. Y solo tengo las alarmas q tenia antes. El sonido si q me deja cambiar, pero el tiempo y vibracion no.

[[ERROR-TRANS]]Mande unos pantallazos de como se ne sale, estaran dos o tres pags detras de esta .

@Anaisabel said:

@RuthbiaYou will not know what I can do so that I let me accept or save the adjustments that I want to make in Diabox?

Since I was currently Android 15 I cannot modify anything, since acrptar's pants know that very low.And I only have the alarms that I had before.The sound if it lets me change, but time and vibration no.

Send some screenshots of how it gets out, there will be two or three pages behind it.

I think that's why Diaboxkotlin created.

I download Diaboxkotlin and without trying to connect, I couldn't change, accept and/or keep anything.It came out like Diabox.

Well, the first time that with these sensors of this "cursed" lot, my sensor spoils me after a week of having put it. Alarming differences with the capillary and this morning suddenly, your sensor does not work, replace it.

I have called Abbot, yes, I know another, I hope it is not the general tonic of this lot.I have told him, which gives me the feeling that they are regular and they tell me that it is not a lot, that it will be the sensor and that in summer they can fail with heat ...

Anyway, patience. I have not activated Diabox, at least I have continuous measurement in the free and alarms.

When trying to see the connected app, that is, LibreLink Up and Libreview, it always tells me that it is not possible to obtain information from that.That is also what it is too?

I get continuously

@meginer you have to enable it in

@Ruthbia said:

@meginerYou have to enable it in

When I open the app and I give connected app.

I don't know if I have to do something in mobile settings but it has never happened to me

Look that I do not use the app and I get the option.

Contact Abbott, to see what they tell you.

Ruthbia said:
@Ruthbia said:

Look that I do not use the app and I get the option.

Contact Abbott, to see what they tell you.

The next day I call again, and after a long time, it turns out that oh, my God, Mi.Change the version and no longer compatible?

So I do not have continuous measurement, I have no alarms and I have also realized that the estimation of the gyted says that it does not have enough May data until today, it is as if they were not arriving. The data and the previous ones had been erased.

So the most incompetent customer service cannot be.

I am looking for solutions.In the end I will remove the sensor, total, they will send me two pq cdo.no.Asaben anything, or the mobile is incompatible or they send me a new sensor.With the sensor that puts me, I hope to have the measurement continues and the app of LibreLinkup and Libreview.And if so, try through xDrip to make myself a follower of me.

I don't know if someone has done similar.When it comes to being a follower of myself, that password I have to put in LibreLinkup?, Do I have to create a new email?Could you explain myself step by step?Thank you very much, to see if I can solve this.

@meginer

Have you tried to uninstall freeLink?When you do, turn off the mobile at all and start the mobile again.Then install FreeLink again.

That resets you everything.