Diabox failures

Ruthbia said:
@Ruthbia said:

@meginer

Have you tried to uninstall freeLink?When you do, turn off the mobile at all and start the mobile again.Then install FreeLink again.

That resets you everything.

@Ruthbia said:

@meginer

Have you tried to uninstall freeLink?When you do, turn off the mobile at all and start the mobile again.Then install FreeLink again.

That resets you everything.

meginer said:
@meginer said:

Ruthbia said:
Ruthbiasaid:
@Ruthbiasaid:

@meginer

Have you tried to uninstall freeLink?When you do, turn off the mobile at all and start the mobile again.Then install FreeLink again.

That resets you everything.

I don't think that is, it worked perfectly before all this mess

Good afternoon, I have a question and I don't know if someone has happened to someone.

Until now I have been ulite the Diabox application with the free freestyle 2, and I have given me new the free freestyle plus, of course the old one, lasted 14 days, the new lasts 15, but the application on the 15th does not recognize that it has one more day, that is, on the 14th you indicate that you change the sensor that has expired.

I don't know if it's a problem that something must be done in the application or it is if by system, but the sensor lasts 15 days

Thank you

Antuam Perez said:
@Antuam Perez said:

Good afternoon, I have a question and I don't know if someone has happened to someone.

Until now I have been ulite the Diabox application with the free freestyle 2, and I have given me new the free freestyle plus, of course the old one, lasted 14 days, the new lasts 15, but the application on the 15th does not recognize that it has one more day, that is, on the 14th you indicate that you change the sensor that has expired.

I don't know if it's a problem that something must be done in the application or it is if by system, but the sensor lasts 15 days

Thank you

meginer said:
@meginer said:

meginer said:
Meginersaid:
@meginersaid:

Ruthbia said:
Ruthbia said:
Ruthbiasaid:
Ruthbiasaid:
@Ruthbiasaid:

@meginer

Have you tried to uninstall freeLink?When you do, turn off the mobile at all and start the mobile again.Then install FreeLink again.

That resets you everything.

I don't think that is, it worked perfectly before all this mess

I would have to expect a new sensor or change it, right?I imagine that I cannot uninstall and install with the Q I have placed since Monday.

@Ruthbia said:

Antuam Perezsaid:
@Antuam Perez said:

Good afternoon, I have a question and I don't know if someone has happened to someone.

Until now I have been ulite the Diabox application with the free freestyle 2, and I have given me new the free freestyle plus, of course the old one, lasted 14 days, the new lasts 15, but the application on the 15th does not recognize that it has one more day, that is, on the 14th you indicate that you change the sensor that has expired.

I don't know if it's a problem that something must be done in the application or it is if by system, but the sensor lasts 15 days

Thank you

That is normal, but it shows you the measurement although it does not register it.

thank you

Another question, someone commented that you decided to remove the Diabox application for psychological health, the free freestyle application 3 that is continuous measurement ??

I don't know what you think

Another doubt I have installed Diabox Kolin and it doesn't work, I don't know if it has happened to someone, it is a shame because in these years Diabox was more precise in the measurements than freestyle, but I do not know why it fails much, I will return to install the version of 2023, apologize that I ask so much is that I am a little lost

thank you

@Antuam Perez said:

Another doubt I have installed Diabox Kolin and it doesn't work, I don't know if it has happened to someone, it is a shame because in these years Diabox was more precise in the measurements than freestyle, but I do not know why it fails much, I will return to install the version of 2023, apologize that I ask so much is that I am a little lost

thank you

Free 2 Plus also makes continuous measurement for a long time, I had Diabox by the clock and to be able to calibrate but the continuous measurement already exists giving free permits.

@meginer said:

@Antuam Perez said:

Another doubt I have installed Diabox Kolin and it doesn't work, I don't know if it has happened to someone, it is a shame because in these years Diabox was more precise in the measurements than freestyle, but I do not know why it fails much, I will return to install the version of 2023, apologize that I ask so much is that I am a little lost

thank you

Read a little higher.It is the same that has happened to me. I have been for several weeks.Diabox's 2023 version does not go with the new lots of free 2 plus.I updated the last (Diaboxkotlin) but the new sensors that have given either.I asked in the Diabox group and it seems that the lots of sensors whose serial number begin by 301, they do not go in any way, with nothing ... mine begin by 301 so there is nothing to do.Diabox is working in a compatible version that is expected more or less soon but until then, it is what there is.

Free 2 Plus also makes continuous measurement for a long time, I had Diabox by the clock and to be able to calibrate but the continuous measurement already exists giving free permits.

Thanks for the info again

Antuam Perez said:
@Antuam Perez said:

meginer said:
@meginersaid:

Antuam Perez said:
Antuam Perez said:
@Antuam Perez said:

Another doubt I have installed Diabox Kolin and it doesn't work, I don't know if it has happened to someone, it is a shame because in these years Diabox was more precise in the measurements than freestyle, but I do not know why it fails much, I will return to install the version of 2023, apologize that I ask so much is that I am a little lost

thank you

Read a little higher.It is the same that has happened to me. I have been for several weeks.Diabox's 2023 version does not go with the new lots of free 2 plus.I updated the last (Diaboxkotlin) but the new sensors that have given either.I asked in the Diabox group and it seems that the lots of sensors whose serial number begin by 301, they do not go in any way, with nothing ... mine begin by 301 so there is nothing to do.Diabox is working in a compatible version that is expected more or less soon but until then, it is what there is.

Free 2 Plus also makes continuous measurement for a long time, I had Diabox by the clock and to be able to calibrate but the continuous measurement already exists giving free permits.

Ok thank you very much, if mine begin by 301. I also install Diaboxkolin and I asked me email and password that I don't know why I do not have, since with the previous diabox nothing needs to be registered

Thanks for the info again

Well, although I can't calibrate because Diabox is not going, in the end I took off the sensor, I put another one, uninstall free2 and installed it again.The continuous measurement and alarms began to work normal (that is, of course the TFNO is compatible and I was a good one of the customer service).

Then through a forum, I have been able to freeLinkup as you told me, pass the data to the clock doing a series of things so at least, except the calibration, I have everything.I think it could also have calibration through XDrip but I haven't looked at it well.I don't know if someone knows and has done it.

Thank you

meginer said:
@meginer said:

Well, although I can't calibrate because Diabox is not going, in the end I took off the sensor, I put another one, uninstall free2 and installed it again.The continuous measurement and alarms began to work normal (that is, of course the TFNO is compatible and I was a good one of the customer service).

Then through a forum, I have been able to freeLinkup as you told me, pass the data to the clock doing a series of things so at least, except the calibration, I have everything.I think it could also have calibration through XDrip but I haven't looked at it well.I don't know if someone knows and has done it.

Thank you

Ruthbia said:
@Ruthbia said:

meginer said:
Meginersaid:
@meginersaid:

Well, although I can't calibrate because Diabox is not going, in the end I took off the sensor, I put another one, uninstall free2 and installed it again.The continuous measurement and alarms began to work normal (that is, of course the TFNO is compatible and I was a good one of the customer service).

Then through a forum, I have been able to freeLinkup as you told me, pass the data to the clock doing a series of things so at least, except the calibration, I have everything.I think it could also have calibration through XDrip but I haven't looked at it well.I don't know if someone knows and has done it.

Thank you

Well, less bad !!!It gives me that it was your sensor that was not going at all.

Good evening I wanted to tell you, today I have started a new 3+ free sensor, the fact is that if you scanning it by the sensor, it reads it, but if you do not work, it comes out notice of signal loss and does not connect, I have installed the application of Diabox of 2023, and recognizes the sensor, but no medication comes out, I do not know if it is a failure of the sensor or that, I do not know if they have happened to someone

thank you

Antuam Perez said:
@Antuam Perez said:

Good evening I wanted to tell you, today I have started a new 3+ free sensor, the fact is that if you scanning it by the sensor, it reads it, but if you do not work, it comes out notice of signal loss and does not connect, I have installed the application of Diabox of 2023, and recognizes the sensor, but no medication comes out, I do not know if it is a failure of the sensor or that, I do not know if they have happened to someone

thank you

meginer said:
@meginer said:

Antuam Perez said:
Antuam Perezsaid:
@Antuam Perez said:

Good evening I wanted to tell you, today I have started a new 3+ free sensor, the fact is that if you scanning it by the sensor, it reads it, but if you do not work, it comes out notice of signal loss and does not connect, I have installed the application of Diabox of 2023, and recognizes the sensor, but no medication comes out, I do not know if it is a failure of the sensor or that, I do not know if they have happened to someone

thank you

Look to see the serial number that comes in the sensor's box, if you start by 301, forget about Diabox PQ is not compatible.

@Antuam Perez said:

Meginersaid:
@meginersaid:

Antuam Perezsaid:
Antuam Perezsaid:
@Antuam Perez said:

Good evening I wanted to tell you, today I have started a new 3+ free sensor, the fact is that if you scanning it by the sensor, it reads it, but if you do not work, it comes out notice of signal loss and does not connect, I have installed the application of Diabox of 2023, and recognizes the sensor, but no medication comes out, I do not know if it is a failure of the sensor or that, I do not know if they have happened to someone

thank you

Look to see the serial number that comes in the sensor's box, if you start by 301, forget about Diabox PQ is not compatible.

No, it does not start by 301, it starts by 3mh, but the bad thing is that it does not work with the free application ofLink if I do not scan it

I have the free 2 plus but it is similar to 3. That happened to me because the version did not have updated, or that told me those of Abbott.

If you don't go, the flames.

Someone knows if Diabox Koling can be calibrate as normal diabox does not work for calibration