Diabox failures

GOOD I DO NOT BE

A sub -management, which I wanted to do, the other day I had to talk to Abbot, because the patch failed me, it gave me erroneous measurements, (the patch gave 100, and with the puncture on the finger I salt 50) they changed my patch without problem, but recommend that they should incorporate the calibration, I suppose they will ignore

Antuam Perez said:
@Antuam Perez said:

A sub -management, which I wanted to do, the other day I had to talk to Abbot, because the patch failed me, it gave me erroneous measurements, (the patch gave 100, and with the puncture on the finger I salt 50) they changed my patch without problem, but recommend that they should incorporate the calibration, I suppose they will ignore

meginer said:
@meginer said:

Antuam Perez said:
Antuam Perezsaid:
@Antuam Perez said:

A sub -management, which I wanted to do, the other day I had to talk to Abbot, because the patch failed me, it gave me erroneous measurements, (the patch gave 100, and with the puncture on the finger I salt 50) they changed my patch without problem, but recommend that they should incorporate the calibration, I suppose they will ignore

I doubt it ... according to them, the calibration comes from the factory and it is not necessary ...

@Jordiv said:

Hello

I realize that I don't have activated bluetooth, and I don't know how to activate it (in the mobile if it is activated).

I don't see where to do it.

JordiV said:
@Jordiv said:

JordiV said:
@Jordivsaid:

Hello

I realize that I don't have activated bluetooth, and I don't know how to activate it (in the mobile if it is activated).

I don't see where to do it.

I have already reinstated the Diabox again, and now everything works.

Good someone has ever tried free 3 or free 3+, and would you know if you can use it both with the meter scanning it, and with the application of the mobile ???con el 1 y el 2+ si se puede pero no sabria si con el 3 o 3+ se puede

thank you

@Antuam Perez I think it depends on each mobile and the Android version.

My mobile is very old and the Diaboxtkolin did not work for Bluethooth just for NFC.

Free 3 or 3+ I have not tried any.

Antuam Perez said:
@Antuam Perez said:

JordiV said:
Jordivsaid:
@Jordivsaid:

JordiV said:
JordiV said:
Jordivsaid:
@Jordivsaid:

Hello

I realize that I don't have activated bluetooth, and I don't know how to activate it (in the mobile if it is activated).

I don't see where to do it.

I have already reinstated the Diabox again, and now everything works.

How lucky to me only the Diaboxkolin works, the other Diabox does not connect with Bluetuch

Hello

Why can't I scan the freestyle sensor, with the current Diabox?

Scan, or I try, and this comes out.

@Jordiv said:

Hello

Why can't I scan the freestyle sensor, with the current Diabox?

Scan, or I try, and this comes out.

It is increasing

Good morning, I already told you that the sensor was giving me problems, until yesterday at noon he said enough and asked me for change.I had about 10 days and I got the mistake of "wait 10 minutes and blah, blah, blah ..." so I claimed Abbott to send me another replacement and put another one.

When saving the old man to return Abbott I realized that the new one began by a code other than all the last ones and, although I have been with him less than a day, the differences with the glycometer values ​​are quite acceptable, of the order of 15 or 20 below and not the 40-50-60 of the last ones.

I understand that all the problems with the last lots of sensors come by Abbott that have changed go to know what and have pified it.

PS: I'm going to give the new sensor a few days to see if it maintains the values ​​or is a coincidence.

@Sandman, yesterday start sensor and hook me in the minute and nail all the measures that I have made.The last one marked differences of 50 but it was arranged and the difference stayed in 20-30.

I continue with Diabox June 2023.

Anaisabel said:
@Anaisabel said:

@Sandman, yesterday start sensor and hook me in the minute and nail all the measures that I have made.The last one marked differences of 50 but it was arranged and the difference stayed in 20-30.

I continue with Diabox June 2023.

With this, @sandman

Then it is seen that the problem is one of those who begin 3MH015 ... that measure at least 50 below and give error several days before being exhausted.

Anaisabel said:
@Anaisabel said:

With this,@Sandman

Everyone has lasted 15 days

@Anaisabel said:

@Sandman, yesterday start sensor and hook me in the minute and nail all the measures that I have made.The last one marked differences of 50 but it was arranged and the difference stayed in 20-30.

I continue with Diabox June 2023.

The current one goes like a chestnut.

JordiV said:
@Jordiv said:

Anaisabel said:
@Anaisabelsaid:

@Sandman, yesterday start sensor and hook me in the minute and nail all the measures that I have made.The last one marked differences of 50 but it was arranged and the difference stayed in 20-30.

I continue with Diabox June 2023.

Could the 2023 diabox have ??

The current one goes like a chestnut.

All these are going well with Diabox, the one who marked in red did not reach 15 days.The last one started yesterday.Android 14, Diabox 2023.